Lattice grilles, lawn plates, plastic, lawn, green, certified, 50x50x4cm, with spines

Lattice grids with spines made of recycled plastic Eco - so the color can deviate a bit

Plastic lawn grilles are an excellent alternative to paving stones, asphalt, concrete and conventional grilles. They can be relocated quickly and without much effort and the biologically active surface is preserved. For example, they are the perfect solution for reinforcing a slope or an embankment. They are also used for hiking trails, access to residential buildings or garages, in animal enclosures or even as a caravan parking space.

The construction enables intermissant visual effects to be achieved, such as green parking and roads or footpaths from gravel. The grille can be filled with both soil and with fine aggregates. It effectively stabilizes the soil and prevents trace or marks. The grille is light and easy to put together- like puzzles. It has a high load capacity, up to 16 t/m2. The material is not only strong, but also clean and heavy metal -free, durable and good for the environment.

Laying:

The installation is quick and easy. Individual panels are connected to other grids by integrated hooks in the edges until the desired total area is created. The construction is stable and at the same time completely permeable to water. Smart puddles and gear grooves belong to the past.

Characteristics

• One -piece size: 50 cm x 50 cm x 4 cm
• Color green
• Material: Plastic Made from 100% recycled raw material
• Load: up to 16 t / m2
• Profile height: 4 cm
• 4 pieces - 1m2
• Made in the EU
• Frost and UV radiation, resistant to low and high temperatures (-30 to 85 ° C)
• 100% water permeability
• The biologically active area is more than 50 %

Positive TUV tests:
✅ The Garden Puzzle Raser honeycomb was subjected to a series of strength tests at the plastics institute (IS-an5-MUC) of the TUV SUD Lustrie Service GmbH, Germany.
✅ The exams were carried out according to DIN EN ISO 604: 2003-12,
✅ The panels are approved for standard use under vehicles with a weight of up to 3.5 tons.
✅ The grass grilles are approved for use under fire departments up to 16 tons

Display areas:

• Sidewalk
• Access
• green parking spaces
• Gear access
• Marketplaces
• Park paths, cycle paths
• Golfer
• Campsites
• Garden and landscape architecture
• Horse stables, paddock
• Animal pathways
• Attachment of granspieces
• Street edge

 Underground preparation for the grille, parking, access (substructure)

The surface must be prepared accordingly before laying the Garden Puzzle II lawn grille. The preparation depends on the future use of the resulting area. If the panels are to be used as a parking lot, road or traffic area, they prepare a standard substructure as with paving stones. Remove the top layer of soil, lay out a geotextile, sprinkle fuels, preferably with a diameter of up to 35 mm, and compress it mechanically. The layer of aggregates depends on many factors, including whether the topsoil is compacted or relaxed. Spread a thin layer of support over the aggregate (small pebbles up to 5 mm - no sand!). Then place the agro or geotextile fabric on a perfectly flat surface and place the Garden Puzzle II grille without spikes on it! (Spikes damage the agrotextil and can damage the grille if you try to drive it into the compacted surface). After lining, the garden puzzle grille should be filled up depending on the desired effect:

✔️ If you want a green parking lot or sidewalk, fill it up with garden soil and then sow grass.

✔️ If you wish for a simple parking or away, fill it up to 10 mm with small stones (also decorative) .

Preparation of the surface for the plastic lawn grilles

The Garden Puzzle lawn grille is very often used as temporary sidewalks, paths in the garden or on the farm. If it is only to be used for footpaths or light transports (bicycles, wheelbarrows, trolleys), it can be made at very low costs. Remove the turf, pave the surface, lay out the agricultural textile and then lay the garden puzzle grille. In addition, the garden puzzle grille can be attached with special garden edge pencils / herrings with a length of 225 mm each.

Laying:

The installation is quick and easy. Individual panels are connected to other grids by integrated hooks on the edges until the desired total area is created. The construction is stable and at the same time completely permeable to water. Sludge, puddles and gear grooves belong to the past. By scanning the QR code you come directly to the assembly instructions.