Geogitter height 5 cm - cross -section 2.4 x 6.2 m

Geogitter height 5 cm - cross -section 2.4 x 6.2 m

We offer geogitter (5 cm height) 2.4m x 6.2m

Perfect solution to facilitate construction and road work

In order to fold the geogitter, you should attach the geogitter to the floor on the previously prepared surface, which is lined with a layer of geotextile, with special fastening pins. The individual sections of the geogitter are connected by self -clamping plastic tapes. Geo cells are filled with a certain material, e.g. B. stones, concrete, floor with plants. By correctly selecting the filling and compression, you can achieve optimal structural properties.

The geogitter can be used successfully on level surfaces and on the slopes with the inclination up to 45 degrees.

The advantages of the geogitter:

Reduction of the thickness of the street constructions (up to 50%) compared to conventional solutions due to the elimination of the deep soil exchange.
The durability of the shear filling materials due to their closure increases significantly within the geogitter cells.

Significant reduction in the lowering due to the natural compression and limitation of the side shift in geocelles enclosed material.

The use of the geogitter and the surface of geo -plastics (i.e. geotextiles) significantly improves road resistance.

Wichig:

The load -bearing capacity - resilience of geogitter depends on the surface, from layers of support on geogitter and bulk material. The stabilization performance is achieved by interlinking the base material in the geotextile's geogitter openings. In this way, the bulk material is prevented (immobilized) and increases the load -bearing capacity even with low deformations.

Product information

Height: 5 cm
Surface of the folded -out section: 14.88 m2
Density: from 0.936 to 0.952 g/cm3
Max. Control voltage:>/ 21,000 kn/ m2
Consistency against voltage corrosion: 2,000 h
Cell dimensions 26 cm x 20 cm (+/-)