Geogrid height 10 cm - section 2.4 x 6.2 m

Perfect solution to facilitate construction and road works

In order to unfold the geogrid, on a previously prepared surface lined with a layer of geotextile, the geogrid should be fixed to the ground with special fixing pins. The individual sections of the geogrid are connected to one another by self-locking plastic straps. Geocells are filled with a specific material, e.g. B. Stones, concrete, soil with plants. With the right choice of filling and compaction, one can achieve optimal structural properties.

The geogrid can be used successfully both on flat surfaces and on slopes with an incline of up to 45 degrees.

The advantages of the geogrid:

Reduction in the thickness of road structures (up to 50%) compared to traditional solutions due to the elimination of deep soil replacement.
Significantly increases the durability of shear fill materials due to their closure within geogrid cells.

Significant reduction in subsidence due to natural compaction and limitation of lateral displacement in geocell-enclosed material.

The use of geogrids and sheet geosynthetics (ie, geotextiles) significantly improves road durability.

IMPORTANT:

The load-bearing capacity of geogrid depends on the subsoil, base layers under geogrid and bulk material. The stabilization performance is achieved by the interlocking of the bulk material in the geogrid openings of the geotextile. This prevents the bulk material from moving (immobilizes) and increases the load-bearing capacity even with minor deformations.

product information

Height: 10cm
Surface of unfolded section: 14.88 m2
Density: from 0.936 to 0.952 g/cm3
Max. tensile stress: >/ 21 000 kN/m2
Resistance to stress corrosion: 2 000 h
Cell dimensions 26 cm x 20 cm (+/-)